Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Second build Vulcan electric
http://www-.luthiersforum.com/forum/viewtopic.php?f=10130&t=43972		 Page 1 of 1
Author:  Jfurry [ Mon Aug 11, 2014 12:59 pm ]
Post subject:  Second build Vulcan electric
Quilted maple top
Brazilian fingerboard
Limba back and neck
Ebony head plate
Semore dunken slash signature humbuckers
Still need to do the wire harness and the nut and set up.
Author:  Jfurry [ Mon Aug 11, 2014 1:00 pm ]
Post subject:  Re: Second build Vulcan electric
And
Author:  Jfurry [ Mon Aug 11, 2014 1:03 pm ]
Post subject:  Re: Second build Vulcan electric
Not sure I like the Limba pickup covers I made
Author:  dzsmith [ Tue Aug 12, 2014 8:00 pm ]
Post subject:  Re: Second build Vulcan electric
Wow Jeff!
That is sweet!
I'm digging it!
What finish did you use?
Dan
Author:  Jfurry [ Tue Aug 12, 2014 10:49 pm ]
Post subject:  Re: Second build Vulcan electric
Thanks Dan,
It's KLM9. Over z epoxy and glass.
That is a sweet piece of maple. I really did a hack job on the wiring today. I was short on time ( not that it went quickly) what a task, I really thought it would be easier. Nothing with this build went easy though. It was a real lesson for me.. One after the other. :roll:
I did the head stock inlay 3 times...
I sanded through the finish and fixed more time than I can remember.
It took 2 fret jobs to get it right.
And I learned about how titlebond shows through finish.
Ill see how it plays day after tomorrow .
Author:  dzsmith [ Wed Aug 13, 2014 8:10 pm ]
Post subject:  Re: Second build Vulcan electric
Well Jeff,
It certainly looks a lot better than my first four!
Dan
Author:  Jfurry [ Sun Aug 17, 2014 5:26 pm ]
Post subject:  Re: Second build Vulcan electric
Looks great but sounds like dog ah well poo. I gotta open it up and have a look one tone pot is not working. Maybe grounded out? Sounds muddled to my ear. Ant suggestion would be nice. It not quite set up right intonation sounds right but ill be lowering the action a bit more.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/